SWEEPING

 

STREET SWEEPERS BY TYMCO

TYMCO provides powerful and efficient solutions for street sweeping, parking lot sweeping and airport sweeping applications. All of our models improve the appearance of these surfaces and have a positive impact on the environment. TYMCO street sweepers, parking lot sweepers, and airport runway sweepers, are powerful, easily maneuverable, extremely reliable, and are equipped with our cutting edge technologies.

  • mODEL 600: 7.3YD W/BLUELOGIC CONTROL SYSTEM

  • mODEL 500X: 5.7YD HIGH DUMP UNIT UP TO 11’

  • mODEL 435: 4.3YD NON-CDL UNIT

 

Regenerative Air SweepING

Regenerative Air Sweepers, invented in the mid-1960s by TYMCO founder B.W. Young, use an engine to power a blower, which pushes air through a blast orifice across the entire width of a pick-up head, which covers the entire width of the sweeper. The blast of air removes dirt from the surface, penetrating imperfections in the street such as cracks and potholes.

  1. The closed-loop Regenerative Air System uses the force of a high velocity controlled jet of Air created by the powerful blower wheel.

  2. This jet of air blasts down and across the pick-up head onto the pavement and into the cracks forcing up into the air stream packed-on heavy debris as well as fine dust particles.

  3. The debris-laden air stream is pulled into the large hopper, where the air loses velocity and the larger debris falls to the bottom. A screen at the top of the hopper prevents items such as leaves, paper, cans, and rocks from leaving the hopper and entering the centrifugal dust separator.

  4. The patented centrifugal dust separator spins the air along the curved wall of the chamber until the micron-size dust particles are skimmed off into the hopper. Only clean air is returned to the blower to start the Regenerative Air cycle again. This closed-loop system means no dirty air is exhausted into the environment only to settle on the surface again.