Loadmaster - rear LOADERS
Excel / Excel-S
The Excel/Excel-S is our high compaction 1000-1250 pound per yard heavy duty body. With our large 3.7 cubic yard hopper capacity reducing the amount you have to cycle the blades with a quick regenerative cycle time of 22 seconds and standard 1/4" T-1 Alloy hopper floor, 3/16" T-1 Alloy hopper floor. These combined with available options allow us to provide unmatched durability and productivity to our customers.
PPG Coatings
Undercoating
20 to 30+ cubic yard
CNG OPTIONS
Legacy / Legacy-S
The Legacy/Legacy-S is our mid compaction 800-900 pounds per yard body. A lighter body built with the same Loadmaster reliability and productivitiy. A 3 cubic yard hopper capacity and a 19 second regenerating cycle time make the Legacy the quickest of the quick. 3/16" T-1 hopper sides and floor provide abrasion resistance and durability.
PPG Coatings
Undercoating
20 to 30+ cubic yard
CNG OPTIONS
Elite
The best small rear load body available, the Elite comes with a full compaction of 1000 pounds per yard. Great for small spaces and under CDL operations the Elite also provides unmatched quality. 3/16" T-1 hopper sides and 3/16" T-1 hopper floor this unit is built to last. The 1 cubic yard hopper and 18 second cycle time keeps this body moving.
PPG Coatings
Undercoating
6 to 11 cubic yard
CNG OPTIONS
400
The 400 is our classic ribbed side body available with demolition upgrades to handle the toughest material. 1/4" AR 235 body floor, 1/4" AR 235 body roof, 3/16" AR 235 body sides, 1/4" ejector face, 1/4" T-1 sweep blade liner, 1/4" slide blade liner, 3/8" AR 235 hopper floor, 3/8" AR 235 separator, 1/4" T-1 tailgate sides, and a multitude of other structural upgrades (available with the demolition model only) makes this a very tough body.
PPG Coatings
Undercoating
20 to 30+ cubic yard
CNG OPTIONS
Enviromaster / Enviromaster DT
The Enviromaster provides a simple single tailgate solution for your dual stream needs. Designed with a single tailgate with a division in the middle allowing for a lighter less expensive solution that also allows the use of commercial container lifting. The Enviromaster DT is a traditional dual tailgate rear loader for dual stream collection built with Loadmaster reliability. Available in 16, 18, and 20 yard sizes on a single rear axle chassis and 20,25, and 27 yard sizes on a dual rear axle.
PPG Coatings
Undercoating
16 to 20 cubic yards on single axle
20 to 27 cubic yards on dual axle
CNG OPTIONS
Eclipse - automated side loader
We made the Eclipse with an emphasis on reliability and simplicity. Just like with our rear loaders this automated side loader provides unmatched reliability and low cost of ownership. The sprocket arm design with all proportional electric over hydraulic controls makes it easy and stable. The constant mesh of the gears and single cylinder operation provide a smooth low wear operation.
Tandem Front Pump
Side Access Door
Dual Clean Out Doors
Fully Dressed Frame Mounted Oil Tank
Frame Mounted In Line Arm
CNG OPTIONS